Spring Sales Event. Save 10% on Custom Window Screens. Use code: SpringSale10

Refine search

Screen Hardware

Shop our endless supply of hardware and screen components for windows. Most hardware is offered in multiples of 10 units each and you can purchase up to a maximum of 100 units. If you are looking to purchase more than this please contact our staff to order by phone.

$0.69  
Aluminum Stretcher Clips are made to hold tension in screen frames covering a large opening. They are rust and corrosion resistant. The clip slips over the screen frame and then, Using a Size Eight Pan Head Phillips Sheet Metal Screw for wood, or a Size 10-24 Pan Head Phillips Machine Screw, it...
In stock

$5.49  
Window Screen Pros Ultimate Window Glass Cleaner is a favorite with our customers! It is a low ammoniated window glass cleaner that is packaged in an easy-to-handle 19 ounce can. Our glass cleaner has effective cleaning agents that will leave your window glass sparkling clean before installing...
In stock

$18.95  
This Plunger Latch Step Drill is used to drill the proper size holes in screen frame for Plunger Latches, all in a single operation. The two-step High Speed Steel Drill Bit has a 7/32" (5.6 mm) shank which "steps" down to 1/8" (3.2 mm). This design keeps the plunger latch contained within the...
In stock

$2.69  
Slip-on Bail Latches are used to hold bottom of screens snug into the window frames. The ball head screw is inserted in the inner side of sill. The bail latch is slipped onto the bottom of the screen frame, and then the bail loop is slipped over the screw to retain the screen. Order this latch...
In stock

$1.59  
Used to support upper part of screen frame, the CRL Jiffy Hanger swivels out from the window frame to permit easy installation or removal of screen. It is easily installed with a nail set. One pair of hangers is needed for each screen. Order in increments of 10 (20 hangers and 20 nails)....
In stock

$0.39  
Plastic Miter Corner for Aluminum Screen Frames. This Plastic Screen Frame Corner is designed to fit 5/16" and 3/8" or 7/16" Screen Frames for miter cut applications. Must be ordered in increments of 10.
In stock

$0.89  
Our Diecast Plunger Latch is designed to hold screens in metal window frames. The spring-loaded Plunger pops into a 7/32" (5.6 mm) hole drilled into the screen frame by using our Step Drill Bit.
In stock

$0.79  
Plastic Lip Frame Corners for Aluminum Screen Frames. This Plastic Screen Frame Corner is designed to fit our lip Screen Frames. Must be ordered in increments of 10.
In stock

$0.69  
These Offset Clips have a 1/4" (6.4 mm) offset which allows the clip to accommodate larger frames. Using a number Eight Phillips Pan Head Sheet Metal Screw for wood, or a number 10-24 Phillips Pan Head Machine Screw for metal frames, the clips are secured to the window frame then turned to...
In stock

$0.59  
This Rivet-On Screen Retainer Clip is riveted to the base of the screen frame and is designed to fit all types and sizes on window screen frame. Once attached, the Retainer slips over the lip of the aluminum window frame, securing the screen frame in place. Rivets are NOT included
In stock

$0.49  
Aluminum Casement Clips are designed to hold screens and storm panels in casement windows. These mill finish Aluminum Clips are rust and corrosion resistant. Using Pan Head Phillips Sheet Metal Screws for wood, or Pan Head Phillips Machine Screws for metal frames, the Clips are first secured to...
In stock

$0.35  
Wire Tension Springs provide necessary tension to keep screens held in metal window frames. To install simply make a notch in the screen using our Notching Tool and insert the Spring.
In stock

$5.99  
Window Screen Pros offers our standard .150 black foam window screen spline that fit the most popular window screen frame size of 5/16". The thickness of foam spline used when constructing a scvreen is determined by the frame sized used as well as the thickness of material you decide to use...
In stock

$0.95  
Spring Latch is a simple device for holding screens into the window sill. Simply drill a 1/8" (3.2 mm) hole into the bottom of the screen frame and twist the spring into the opening. Drive the nail into the sill and slip the spring loop over the top of the nail and the screen will fit tightly...
In stock

$0.49 $0.85  
Plastic Pull Tabs are used to lift a screen out of a window channel. They install in the spline pocket of the screen frame, and have a ridged top for a better grip. These pull tabs are designed to fit all types and sizes of screen frame.
In stock

$0.39  
These Nylon Flush Clips are designed for flush installations. Install using a No. 6 Pan Head Sheet Metal Screw for wood, or a No. 6 Pan Head Machine Screw for metal frame. Clips are fastened to the window frame and turned to secure the screen frame or to allow for easy removal. They will not...
In stock

$0.59  
These steel wire "Rams Horn" Tension Springs are notched into the frame to secure them in the window screen spline channel.
In stock

$0.69  
Flat Tension Springs are heat-treated spring steel. They slip into corners of 5/16" to 7/16" (7.9 to 11 mm) screen frame to help hold screens tightly in the window channel. No tools or drilling is required for installation. The spring simply slips into the square or mitered corner joint of the...
In stock

$0.69  
Plastic "Loop" Pull Tabs are used to easily lift window screens from the window frame. They install into the spline channel like traditional lift tabs.
In stock

$0.45  
Crystal clear plastic Panel Clips are ideal for retaining glass or wood panels. Attach Clip using a No. 8 Pan Head Screws (sold separately).
In stock

$0.49  
This Aluminum Screen Frame Corner is designed to fit 3/4" x 5/16" and 3/4" x 3/8" or 3/4" x 7/16" Screen Frames for miter cut applications. Must be ordered in increments of 10.
In stock